Автоматический антенный тюнер LDG AT-7000

Тюнер новый.

0.1 to 125 watts SSB and CW peak power, 100 watts digital

- 2,000 memories for instantaneous frequency or band chaging

- Tuning time: 0.5 to 6 seconds full tune. <0.1 second memory tune

- Built in frequency counter for memory operation

- Frequency coverage: 1.8 to 54.0 MHz.

- Tunes 4 to 800 ohm loads (16 to 150 ohms on 6M). 4 to 3200 ohms with optional 4:1 Balun (LDG RBA-4:1).

- For Dipoles, Verticals, Vs. Beams or and Coax Fer Antenna

- Optional external Balun allows tuning of random length. Long wire or ladder line fed antennas.

- Dedicated interface to the IC-7000 transceiver (and some other Icom radios)

- Poer requirements: 11 to 16 volts DC at 250 mA max during tuning, <8mA idle, provided by the Icom transiver

- Enclosure: 6.5 x 6.5 x 1.5 inches

- Weight: 1.5 pounds

An Important Word About Poewr Levels.

The AT-7000 is rated at 25 watts maximum power input at most. Many ham transmitters and transceivers, and virtually all amplifaers, output well over 125 watts. Power lewels significantly exceeding specifications will definstely damage or destroy your AT-7000. If your tuner fails during overload, it could damage your transmitter or transceiver. Be sure to observe the specified power limitations.

Мануал можно скачать здесь